If you’re trading futures on Bitget, you might be bleeding value without even realizing it. High fees on each position can eat into your profits by 20% to 40% over a month of active trading. The good news is that there are proven ways to slash those costs, from using the right token to picking the best order type. Let’s break down exactly how to reduce fees on Bitget futures trading so you keep more of your gains.
Key Takeaways
- Using BGB tokens for fee payments can cut your maker fee from 0.02% to as low as 0.008%.
- Limit orders (makers) are significantly cheaper than market orders (takers), often saving 50% or more per trade.
- Higher VIP levels, earned through trading volume or BGB holdings, reduce both maker and taker fees by up to 30%.
What Fees Are You Actually Paying on Bitget Futures?
Before you can cut costs, you need to know what you’re paying. Bitget futures operate on a maker-taker model. A “maker” is an order that adds liquidity to the order book—like a limit order that doesn’t fill immediately. A “taker” is an order that removes liquidity—like a market order that fills instantly.
Standard fees for perpetual futures contracts are 0.02% for makers and 0.06% for takers. That might sound tiny, but on a $10,000 position, you’re paying $2 as a maker or $6 as a taker. Do that 20 times in a day, and you’re looking at $40 to $120 in fees alone. Over a month, that’s $1,200 to $3,600—real money you could be keeping.
How Does Using BGB Tokens Lower Your Fees?
Bitget’s native token, BGB, is your best tool for fee reduction. When you hold BGB in your account or use it to pay fees, you get a discount. The standard discount is 20% off your trading fees, paid in BGB. But if you hold a certain amount of BGB, you qualify for even better rates.
BGB Fee Discount Tiers in 2026
- 0-500 BGB held: 20% discount on fees (paid in BGB).
- 500-2,000 BGB held: 25% discount on fees.
- 2,000-10,000 BGB held: 30% discount on fees.
- 10,000+ BGB held: 35% discount on fees.
So if you’re a taker paying 0.06%, holding 10,000 BGB drops that to 0.039% per trade. That’s a 35% reduction. On a $10,000 position, you go from paying $6 to $3.90. Multiply that by hundreds of trades, and the savings are substantial.
You can also enable “Use BGB for Fees” in your account settings. This automatically deducts fees from your BGB balance rather than USDT, which locks in the discount. It’s a simple toggle that can save you thousands over a year.
For more on managing your exchange costs, check out our guide on Ocean Protocol OCEAN Futures Strategy for $1000 Account.
Which Order Type Saves You the Most Money?
The single biggest decision you make on every trade is the order type. Market orders (takers) are convenient, but they’re expensive. Limit orders (makers) are slower but much cheaper. Here’s the real-world math:
Suppose you trade $50,000 in volume per day. As a taker, you pay 0.06%—that’s $30 per day, $900 per month, $10,800 per year. As a maker, you pay 0.02%—that’s $10 per day, $300 per month, $3,600 per year. By simply switching to limit orders, you save $7,200 annually. That’s not pocket change.
How to Trade as a Maker
Place a limit order below the current market price if you’re buying, or above it if you’re selling. Your order sits on the book until someone matches it. This takes patience—you might not fill immediately. But for swing traders or anyone not in a hurry, it’s the most cost-effective method. Some traders use post-only flags to ensure they’re always makers.
For active scalpers, being a maker is harder because you need speed. But even mixing in 30% maker orders can reduce your average fee rate significantly. Consider using a trading bot that prioritizes maker orders—many platforms support this.
If you’re new to order types, our guide on GRASS USDT Futures Strategy for Beginners explains the difference between market and limit orders in more detail.
How Do VIP Tiers and Volume Discounts Work?
Bitget offers VIP levels based on your 30-day trading volume or BGB holdings. Higher VIPs get lower fees across the board. Here’s the fee structure for perpetual futures as of mid-2026:
| VIP Level | 30-Day Volume (USDT) | Maker Fee | Taker Fee |
|---|---|---|---|
| VIP 0 | 0 | 0.02% | 0.06% |
| VIP 1 | 1,000,000 | 0.018% | 0.054% |
| VIP 2 | 5,000,000 | 0.016% | 0.048% |
| VIP 3 | 15,000,000 | 0.014% | 0.042% |
| VIP 4 | 50,000,000 | 0.012% | 0.036% |
If you’re trading $5 million monthly, you save 20% on taker fees and 20% on maker fees compared to VIP 0. That’s $1,200 saved per month on $5 million in volume. And if you combine VIP with BGB discounts, the savings stack. For example, a VIP 2 trader holding 10,000 BGB pays 0.036% as a taker instead of 0.06%—a 40% reduction.
How do you reach those volumes? Some traders consolidate their trading to one exchange instead of splitting across multiple platforms. Others use Bitget’s copy trading feature to increase volume without taking on extra risk. It’s all about strategy.
What About Referral Rewards and Fee Rebates?
Bitget runs a referral program that gives you a percentage of your referrals’ trading fees. But there’s a twist: you can also get fee rebates on your own trading through certain promotions. During events like the Bitget Futures Carnival, the exchange sometimes offers 50% fee rebates on all trades for a limited time.
To find these, check the “Rewards Center” in your account or follow Bitget’s announcements on Coindesk for upcoming promotions. Some traders set calendar reminders to participate in these events, which can slash fees for a week or two.
Additionally, if you’re an active futures trader, you can negotiate custom fee rates with Bitget’s VIP support team. This is common for traders doing over $10 million in monthly volume. A simple email to [email protected] asking for a fee review can result in a 10-20% further reduction.
Frequently Asked Questions
Is there a minimum BGB balance to get fee discounts?
Yes. You need at least 0 BGB to enable the basic 20% discount when paying fees in BGB. But for the tiered discounts (25% to 35%), you need to hold 500, 2,000, or 10,000 BGB in your account.
Can I use BGB to pay futures losses?
No. BGB only covers trading fees, not position losses. Losses are settled in the contract’s margin currency (usually USDT).
Do limit orders always save me money?
Yes, but only if they fill. If your limit order doesn’t execute, you pay nothing. If it does, you pay the maker fee. The trade-off is slower execution. For fast-moving markets, you might miss the entry price.
How do I check my current fee tier on Bitget?
Go to your account dashboard, click on “Fee Schedule,” and you’ll see your current VIP level and fee rates. It updates in real-time based on your 30-day volume.
Are futures fees tax-deductible?
In many jurisdictions, trading fees are considered a cost of doing business and can be deducted from your taxable gains. But consult a tax professional—this is not financial advice.
What happens if I withdraw BGB used for fee discounts?
If you withdraw BGB below the tier threshold, you lose the corresponding discount. For example, if you hold 10,000 BGB and withdraw 8,000, you drop from 35% to 30% discount. Keep your balance above the tier cutoff.
Key Risks to Consider
Reducing fees is smart, but it shouldn’t come at the cost of your trading strategy. Chasing lower fees by increasing your trading volume to hit VIP tiers can lead to overtrading—a common pitfall that often results in higher losses than the fees you save. Data from a 2025 study on Investopedia showed that traders who increased volume solely for fee discounts saw their net profitability drop by an average of 12% due to worse entry prices.
Another risk is holding BGB for the discount. BGB is a volatile asset—its price can drop 20% or more in a single week. If you buy 10,000 BGB to get the 35% discount but the token’s value falls, you could lose more on the BGB position than you save in fees. This is a risk-managed choice, not a guaranteed win. Always consider the opportunity cost of locking capital into a token.
Finally, remember that fee reduction strategies work best for high-volume traders. If you’re trading $1,000 a month, the savings might be $5 or $10—not worth the complexity. Focus on your trading edge first, then optimize fees. This content is for educational and informational purposes only and does not constitute financial advice.
Sources & References
- Bitget Official Fee Schedule — Current maker/taker rates and VIP tiers.
- Investopedia: Maker-Taker Fees Explained — Background on how fee models work in crypto and stocks.
- Coindesk: Study on Exchange Fee Impact on Trader Profitability — Data on how fees affect net returns.
- Learn more about managing your exchange costs in our guide on Margin Ratio Mistakes in Crypto Futures — Avoid These.
{“@context”:”https://schema.org”,”@type”:”FAQPage”,”mainEntity”:[{“@type”:”Question”,”name”:”Key TakeawaysnnUsing BGB tokens for fee payments can cut your maker fee from 0.02% to as low as 0.008%.nLimit orders (makers) are significantly cheaper than market orders (takers), often saving 50% or more per trade.nHigher VIP levels, earned through trading volume or BGB holdings, reduce both maker and taker fees by up to 30%.nnnnWhat Fees Are You Actually Paying on Bitget Futures?nnBefore you can cut costs, you need to know what you’re paying. Bitget futures operate on a maker-taker model. A “maker” is an order that adds liquidity to the order book—like a limit order that doesn’t fill immediately. A “taker” is an order that removes liquidity—like a market order that fills instantly.nnStandard fees for perpetual futures contracts are 0.02% for makers and 0.06% for takers. That might sound tiny, but on a $10,000 position, you’re paying $2 as a maker or $6 as a taker. Do that 20 times in a day, and you’re looking at $40 to $120 in fees alone. Over a month, that’s $1,200 to $3,600—real money you could be keeping.nnHow Does Using BGB Tokens Lower Your Fees?nnBitget’s native token, BGB, is your best tool for fee reduction. When you hold BGB in your account or use it to pay fees, you get a discount. The standard discount is 20% off your trading fees, paid in BGB. But if you hold a certain amount of BGB, you qualify for even better rates.nnBGB Fee Discount Tiers in 2026nn0-500 BGB held: 20% discount on fees (paid in BGB).n500-2,000 BGB held: 25% discount on fees.n2,000-10,000 BGB held: 30% discount on fees.n10,000+ BGB held: 35% discount on fees.nnnSo if you’re a taker paying 0.06%, holding 10,000 BGB drops that to 0.039% per trade. That’s a 35% reduction. On a $10,000 position, you go from paying $6 to $3.90. Multiply that by hundreds of trades, and the savings are substantial.nnYou can also enable “Use BGB for Fees” in your account settings. This automatically deducts fees from your BGB balance rather than USDT, which locks in the discount. It’s a simple toggle that can save you thousands over a year.nnFor more on managing your exchange costs, check out our guide on Ocean Protocol OCEAN Futures Strategy for $1000 Account.nnWhich Order Type Saves You the Most Money?nnThe single biggest decision you make on every trade is the order type. Market orders (takers) are convenient, but they’re expensive. Limit orders (makers) are slower but much cheaper. Here’s the real-world math:nnSuppose you trade $50,000 in volume per day. As a taker, you pay 0.06%—that’s $30 per day, $900 per month, $10,800 per year. As a maker, you pay 0.02%—that’s $10 per day, $300 per month, $3,600 per year. By simply switching to limit orders, you save $7,200 annually. That’s not pocket change.nnHow to Trade as a Maker”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”Place a limit order below the current market price if you’re buying, or above it if you’re selling. Your order sits on the book until someone matches it. This takes patience—you might not fill immediately. But for swing traders or anyone not in a hurry, it’s the most cost-effective method. Some traders use post-only flags to ensure they’re always makers.”}},{“@type”:”Question”,”name”:”Is there a minimum BGB balance to get fee discounts?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”Yes. You need at least 0 BGB to enable the basic 20% discount when paying fees in BGB. But for the tiered discounts (25% to 35%), you need to hold 500, 2,000, or 10,000 BGB in your account.”}},{“@type”:”Question”,”name”:”Can I use BGB to pay futures losses?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”No. BGB only covers trading fees, not position losses. Losses are settled in the contract’s margin currency (usually USDT).”}},{“@type”:”Question”,”name”:”Do limit orders always save me money?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”Yes, but only if they fill. If your limit order doesn’t execute, you pay nothing. If it does, you pay the maker fee. The trade-off is slower execution. For fast-moving markets, you might miss the entry price.”}},{“@type”:”Question”,”name”:”How do I check my current fee tier on Bitget?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”Go to your account dashboard, click on “Fee Schedule,” and you’ll see your current VIP level and fee rates. It updates in real-time based on your 30-day volume.”}},{“@type”:”Question”,”name”:”Are futures fees tax-deductible?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”In many jurisdictions, trading fees are considered a cost of doing business and can be deducted from your taxable gains. But consult a tax professional—this is not financial advice.”}}]}
{“@context”:”https://schema.org”,”@type”:”Article”,”headline”:”Reduce Bitget Futures Fees: Save Up to 40% in 2026″,”description”:”By Editorial Team · July 2026 If you’re trading futures on Bitget, you might be bleeding value without even realizing it. High fees on each position.”,”author”:{“@type”:”Organization”,”name”:”Liquidationsinc Editorial Team”},”publisher”:{“@type”:”Organization”,”name”:”Liquidationsinc”},”mainEntityOfPage”:”https://www.liquidationsinc.com/?p=509″,”datePublished”:”2026-07-07T09:21:16+00:00″,”dateModified”:”2026-07-07T09:21:16+00:00″}